Manufacturers of Eco Friendly Cleaners and Sealants

Everstrong Nano Sealer For Masonry And Cement

$71.10

LOW VOC Exterior Concentrate

Creates an Invisible Barrier for: Brick • Limestone • Sandstone • Concrete • Pavers • Stucco

1 GALLON

Technical Datasheet

SKU: ES-109 Categories: , ,

Everstrong Nano Sealer For Masonry And Cement is a water-based Nano alkylalkoxysilane penetrating water repellent. It is designed specifically for brick masonry, limestone, sandstone, pre-cast, and concrete surfaces, including blocks, pavers, stucco and many natural surfaces where darkening is unacceptable. Dries clear and tack free.

Everstrong Nano Sealer For Masonry And Cement reduces bonding of airborne hydrocarbons, reduces water damage, repels water, snow and ice & from freeze-thaw, protects surface against efflorescence, and has excellent ultraviolet resistance; it is VOC (Volatile Organic Compound) compliant as well.

How to Apply

APPLICATION: Surface must be clean, dry and free of oil, grease and other contaminants. New concrete should be allowed to cure at least 14 days before application. Product may be applied with low-pressure spray equipment, a brush, or a roller. When using low-pressure equipment, apply a light mist coating to break the surface tension; this allows for good penetration. Repeat the process with flood coat (4 to 6 inches run down).

NOTES: Air and surface temperature must be above 40° F during application. Caulking should be installed prior to application. Protect surrounding non-masonry surfaces, such as glass, aluminum, etc. Inadvertent splash should be removed with water before the solution has dried on the surface. Do not apply when rain is predicted with 24 hours.

COVERAGE:

  • Brick Masonry: Approx. 150-200 Sq. Ft./Gal.
  • Limestone: Approx. 100-150 Sq. Ft./Gal.
  • Smooth (precast): Approx. 100-125 Sq. Ft./Gal.
  • Rough Exposed Aggregate: Approx. 80-125 Sq. Ft./Gal.
  • Block (high density): Approx. 75-100 Sq. Ft./Gal.
  • Block (low density): Approx. 50-75 Sq. Ft./Gal.
  • Limestone: Approx. 100-125 Sq. Ft./Gal.

Facts & Warnings

HMIS RATINGS:
Health: 1
Reactivity: 0
Flammability: 0
Personal Protection: 1

CAUTION: Wear rubber gloves and eye protection. Wash all equipment with soap and water. If swallowed seek medical attention. If eye contact occurs, flush eyes with water for 10 minutes. If skin contact occurs, wash the skin with warm water and soap.

KEEP OUT OF REACH OF CHILDREN.

Reviews


There are no reviews yet.

Be the first to review “Everstrong Nano Sealer For Masonry And Cement”